iNTO Interior Primer / Painting instructions

iNTO INTERIOR PRIMER / painting instructions

iNTO Interior Primer is suitable for unpainted or previously painted various interior wood and stone surfaces, such as walls and roofs in dry place. The product is not suitable from priming floor surfaces and the product is not used under translucent paints and other treatment agents. iNTO Primer can be used with iNTO Interior Paint, iNTO Furniture Paint, Uula Door and Window Paint and with Uula Eggshell Interior Oil Paint. iNTO Primer is pleasant to use since it is odorless, dries fast and can be re-painted quickly. The primer affects the absorption of the top coat, improves the adhesion of the top coat and makes it easier to paint the top coat. iNTO Primer can also be used as matt interior paint.


iNTO Primer is white and can be used as that. Primer can be tinted to the light colors according to our Interior Color Chart and Uula Traditional Color Chart. Can also be tinted to light colors according to most common color charts. This means that there are hundreds of color options. Please notify that there may be differences in tinting pastes, in tinting machines and in tinting. Choose to colour in the same lighting and space where the painting will be done.


We recommend using paint roller or ordinary paint brush depending on the surface material and structure. The surface to be painted must be dry, the relative air humidity below 80 % and the temperature at least +10°C. The painted surface is tack-free in approx. 30 minutes and can an be painted over after 4 hours. If the painted surface is porous the Primer can thinned by 15 % with water.


Stir well before use and during painting. Reserve enough paint for a large surface in order to avoid potential color variations in different batches. Do a test painting to ensure that the color is correct. Please note that the correct color of the paint is visible after the surface is dry. Take care of the painting environment and protect untreated surfaces with adhesive tape, paper, cardboard or protective film.

Pre-treatment: Brush of dust from the surface.Wash dirty surfaces with Uula Washing Agent following the instructions. Allow to dry thoroughly before painting.

Priming: Level all cracks and holes in the surface with putty if necessary. Remove sanding dust and clean the surface before painting. Prime new surfaces with iNTO Primer

Finishing: Paint the primed surface with the chosen paint type. Be careful with all painted surfaces during the first month. Clean the surface only with soft rags and sponges that do not scratch the surface. Use only neutral washing agents. Rinse the surfaces carefully.



  • Gloss-grade: matt
  • Belong to the best emission class M1 in building materials.
  • Does not contain any VOC.
  • Coverage approx 7 m2/L depending on the coarseness and porosity of the surface.
  • Thinner: Water
  • Cleaning of equipment: Clean the equipment with soap and water right after you have finished painting.
  • Container sizes: 0.9 L, 2.7 L and 9 L.
  • Storage and disposal: Keep in a cool and dry place. DO NOT ALLOW TO FREEZE! Dry and empty containers can be taken to a refuse dump. Liquid waste must be taken to a municipal hazardous waste collection point.
  • Non-flammable.

iNTO Furniture Paint semi glossy

Read more and order »

Into Furniture Paint semi matt

Read more and order »

iNTO Interior Paint Semi-Matt

Read more and order »

iNTO Interior Paint Matt

Read more and order »

Into Interior Primer

Read more and order »

Uula Door and Window Paint

Read more and order »

Uula Washing Agent

Read more and order »

How can we help?